This is a full solar setup. Inverter, battery, panels. Everything you need to cut your dependence on grid power or NEPA completely, depending on how you use it.

The SRNE 3kVA inverter sits at the center of it. It’s a hybrid unit, so it manages solar input, battery storage, and grid or generator backup all at once. Your appliances see clean, stable power regardless of what’s happening with the source. Whether the sun’s up, the battery’s carrying the load overnight, or grid power kicks in during a cloudy stretch, the inverter handles the switching automatically.

Six 350W solar panels give you 2,100 watts of generation during the day. On a good sunny day with decent sunlight, that’s enough to charge your 3kWh LiFePO4 battery and power your appliances at the same time. The battery covers you from evening into the night, or through cloudy periods when the panels aren’t generating much.

The LiFePO4 battery is where this kit separates itself from older lead-acid setups. It discharges deeper, charges faster, and lasts far longer. We’re talking 6,000 plus cycles, which works out to roughly 10 years of daily use. No water topping, no acid maintenance, no swelling. The BMS built into the battery handles overcharge, over-discharge, and short circuit protection automatically.

What this kit can power:

A 3kVA system with 3kWh storage and 2,100W of solar is well-suited for a standard home or small office. Comfortably runs:

• Ceiling fans (2 to 3 units)
• LED lighting (whole house)
• 32″ or 43″ TV
• Decoder and Wi-Fi router
• Refrigerator or freezer (energy-efficient models)
• Water pump (0.5HP to 1HP)
• Phone and laptop charging
• Standing fan

With load management, it can also handle:

• Small air conditioner (1HP, used in short bursts)
• Microwave (used briefly, not continuously)
• Small water dispenser

What it’s not designed for: running a 1.5HP or 2HP AC all night, electric pressing irons continuously, or any heavy industrial load. Those need a bigger system.

System Specifications

SRNE 3kVA Hybrid Inverter

• Output: 3kVA / 2,400W continuous
• Compatible with: LiFePO4 and lead-acid batteries
• Solar MPPT input: up to 4,000W (varies by model)
• Input voltage range: 24V DC
• Output: 220V AC, pure sine wave
• Grid/generator charging: supported
• LCD display with real-time monitoring

3kWh LiFePO4 Battery

• Nominal voltage: 25.6V
• Chemistry: Lithium Iron Phosphate (LiFePO4)
• Depth of discharge: 80%
• Cycle life: 6,000+ cycles
• Charging voltage: 24V to 29V
• Max charging current: 100A
• Built-in BMS: short circuit, overcharge, over-discharge protection
• Maintenance-free
• Warranty: 5 years

6 x 350W Solar Panels

• Total generation: 2,100W peak
• Panel type: Monocrystalline
• Panel wattage: 350W each
• Output voltage: 24V compatible
• Works in partial shade (output reduced but not zero)

A solid mid-range setup for homes that want real backup capacity. Not the cheapest option on the market, but you’re getting a system that’ll still be working properly five years from now.